SolidWorks Beginners Course - Learn from an expert!

Focused View

Elite Engineering

5:30:38

156 View

1. Introduction

1.1 engineering companies logos.zip

1.2 software box mockup beginner 1.zip

1. Introduction - Welcome To My Course.mp4

00:21

2. About This Course.mp4

00:56

3.1 cswe certificate.zip

3. About The Tutor.mp4

01:17

4. What Is In This Course.mp4

02:09

5. Learning Objectives.mp4

01:18

6. Course Scope.mp4

00:44

7. Who Is This Course For.mp4

00:45

8. Software Access.mp4

02:06

9. Using This Course.mp4

01:53

2. SolidWorks Theory - Optional (but very useful)

1. Introduction To SolidWorks Software.mp4

05:49

2. Introduction To SolidWorks Part Models.mp4

00:35

3. Introduction To SolidWorks Assembly Models.mp4

01:56

4. Introduction To SolidWorks Technical Drawings.mp4

01:22

5. Interaction Between Parts, Assemblies and Drawings.mp4

01:15

3. SolidWorks Models and Drawings

1.1 Steam Engine.PDF

1. Technical Drawings of Steam Engine.html

2.1 PARTS AND ASSEMBLY.zip

2. Complete Steam Engine Models and Assembly.html

4. Modelling Process

1.1 sk solidworks modelling process.zip

1. Modelling Process.html

5. Part 1 Big End Journal Part Modelling

1. Introduction Big End Journal SOLIDWORKS Training L1.mp4

02:14

2. Reading the Drawing Big End Journal SOLIDWORKS Training L1.mp4

01:17

3. Creating a Modelling Plan Big End Journal SOLIDWORKS Training L1.mp4

00:41

4. Setting the Measurement System Big End Journal SOLIDWORKS Training L1.mp4

01:11

5. Starting a New Planar Sketch Big End Journal SOLIDWORKS Training L1.mp4

00:59

6. Using the Origin - Big End Journal SOLIDWORKS Training L1.mp4

00:29

7. Drawing a Circle Big End Journal SOLIDWORKS Training L1.mp4

01:17

8. Adding Smart Dimensions Big End Journal SOLIDWORKS Training L1.mp4

02:20

9. Extrude Boss Base Feature Big End Journal SOLIDWORKS Training L1.mp4

02:17

10. Chamfer Feature Big End Journal SOLIDWORKS Training L1.mp4

02:51

11. Apply a Material to the Part Big End Journal SOLIDWORKS Training L1.mp4

01:29

12. Evaluate the Mass Big End Journal SOLIDWORKS Training L1.mp4

00:36

13. Save the Part Big End Journal SOLIDWORKS Training L1.mp4

00:51

14. Outro Big End Journal SOLIDWORKS Training L1.mp4

01:16

6. Part 2 Crank Shaft Part Modelling

1. Introduction Crank Shaft SOLIDWORKS Training L1.mp4

01:02

2. Reading the Drawing Crank Shaft SOLIDWORKS Training L1.mp4

00:37

3. Creating a Modelling Plan Crank Shaft SOLIDWORKS Training L1.mp4

00:21

4. Creating the Sketch and Extrude Crank Shaft SOLIDWORKS Training L1.mp4

02:04

5. Material, Mass and Save Crank Shaft SOLIDWORKS Training L1.mp4

01:34

6. Outro Crank Shaft SOLIDWORKS Training L1.mp4

00:45

7. Additional SolidWorks Key Skills

1. Edit Sketch - Dimensions SOLIDWORKS Training L1.mp4

01:52

2. Edit Sketch Change Shape SOLIDWORKS Training L1.mp4

02:07

3. Edit Sketch Delete Profile SOLIDWORKS Training L1.mp4

01:43

4. Edit Sketch - Trim Entities SOLIDWORKS Training L1.mp4

00:42

5. Edit Feature SOLIDWORKS Training L1.mp4

01:07

6. Adding and Deleting Sketch Relations SOLIDWORKS Training L1.mp4

06:16

7. Rotate Model SOLIDWORKS Training L1.mp4

01:18

8. Zoom in and Out SOLIDWORKS Training L1.mp4

01:01

9. Moving the part around SOLIDWORKS Training L1.mp4

00:39

8. Part 3 Crank Shaft Bush Part Modelling

1. Introduction - Crank Shaft Bush SOLIDWORKS Training L1.mp4

01:31

2. Reading the Drawing - Crank Shaft Bush SOLIDWORKS Training L1.mp4

01:48

3. Creating a Modelling Plan - Crank Shaft Bush SOLIDWORKS Training L1.mp4

00:34

4. First Sketch and Extrude - Crank Shaft Bush SOLIDWORKS Training L1.mp4

00:58

5. Starting a New Face Sketch - Crank Shaft Bush SOLIDWORKS Training L1.mp4

01:26

6. Second Sketch and Extrude - Crank Shaft Bush SOLIDWORKS Training L1.mp4

00:41

7. Hidden Detail Line on a Drawing - Crank Shaft Bush SOLIDWORKS Training L1.mp4

00:48

8. Third Sketch and Cut Feature - Crank Shaft Bush SOLIDWORKS Training L1.mp4

01:37

9. Adding Chamfers - Crank Shaft Bush SOLIDWORKS Training L1.mp4

01:21

10. Apply a Material, Evaluate Mass - Crank Shaft Bush SOLIDWORKS Training L1.mp4

00:45

11. Save the Part - Crank Shaft Bush SOLIDWORKS Training L1.mp4

00:19

12. Outro - Crank Shaft Bush SOLIDWORKS Training L1.mp4

01:18

9. Part 4 Piston Part Modelling

1. Introduction - Piston SOLIDWORKS Training L1.mp4

01:28

2. Reading the Drawing - Piston SOLIDWORKS Training L1.mp4

00:36

3. Creating a Modelling Plan - Piston SOLIDWORKS Training L1.mp4

01:40

4. Creating and Saving the Model - Piston SOLIDWORKS Training L1.mp4

02:53

5. Outro - Piston SOLIDWORKS Training L1.mp4

01:21

10. Part 5 Connecting Rod Part Modelling

1. Introduction - ConRod SOLIDWORKS Training L1.mp4

01:30

2. Reading the Drawing - ConRod SOLIDWORKS Training L1.mp4

01:15

3. Creating a Modelling Plan - ConRod SOLIDWORKS Training L1.mp4

01:03

4. Body Dual Extrusion - ConRod SOLIDWORKS Training L1.mp4

01:20

5. The Measure Tool - ConRod SOLIDWORKS Training L1.mp4

01:25

6. Cut a Flat onto a Round Face - ConRod SOLIDWORKS Training L1..mp4

02:59

7. Dimensioning a Circular Sketch - ConRod SOLIDWORKS Training L1.mp4

02:00

8. Adding Manual Sketch Relations - ConRod SOLIDWORKS Training L1.mp4

01:13

9. Cutting the Hole - ConRod SOLIDWORKS Training L1.mp4

00:30

10. Adding Chamfers - ConRod SOLIDWORKS Training L1.mp4

00:49

11. Material, Mass and Save - ConRod SOLIDWORKS Training L1.mp4

00:54

12. Outro - ConRod SOLIDWORKS Training L1.mp4

00:55

11. Part 6 Crank Part Modelling

1. Introduction - Crank SOLIDWORKS Training L1.mp4

01:54

2. Reading the Drawing - Crank SOLIDWORKS Training L1.mp4

02:57

3. Creating a Modelling Plan - Crank SOLIDWORKS Training L1.mp4

00:55

4. Creating the Material Blank - Crank SOLIDWORKS Training L1.mp4

00:32

5. Positioning and Cutting Centre Hole - Crank SOLIDWORKS Training L1.mp4

00:39

6. Positioning and Cutting Top Hole - Crank SOLIDWORKS Training L1.mp4

01:03

7. Side Cut-outs with Relationships - Crank SOLIDWORKS Training L1.mp4

02:26

8. Adding Radius - Crank SOLIDWORKS Training L1.mp4

00:58

9. Adding Chamfers - Crank SOLIDWORKS Training L1.mp4

00:45

10. Sketching on a Plane - Crank SOLIDWORKS Training L1.mp4

03:10

11. Edit Sketch Size - Crank SOLIDWORKS Training L1.mp4

00:52

12. Search Material and Check Mass - Crank SOLIDWORKS Training L1.mp4

01:19

13. Change the Appearance - Crank SOLIDWORKS Training L1.mp4

00:52

14. Flexible Modelling Approach - Crank SOLIDWORKS Training L1.mp4

03:09

15. Outro - Crank SOLIDWORKS Training L1.mp4

01:08

12. Part 7 Base Part Modelling

1. Introduction - Base SOLIDWORKS Training L1.mp4

01:54

2. Reading the Drawing - Base SOLIDWORKS Training L1.mp4

01:19

3. Creating a Modelling Plan - Base SOLIDWORKS Training L1.mp4

01:47

4. Creating the Material Blank - Base SOLIDWORKS Training L1.mp4

00:41

5. Adding Chamfers - Base SOLIDWORKS Training L1.mp4

00:31

6. Side Scoop Cut-out - Base SOLIDWORKS Training L1.mp4

02:02

7. Through Holes with Relationships - Base SOLIDWORKS Training L1.mp4

02:26

8. Blind Holes with Relationships - Base SOLIDWORKS Training L1.mp4

01:04

9. Material, Mass, Save - Base SOLIDWORKS Training L1.mp4

00:57

10. Changing the Sketch Plane - Base SOLIDWORKS Training L1.mp4

02:24

11. Outro - Base SOLIDWORKS Training L1.mp4

01:03

13. Part 8 Frame Part Modelling

1. Introduction - Frame SOLIDWORKS Training L1.mp4

01:41

2. Reading the Drawing - Frame SOLIDWORKS Training L1.mp4

01:21

3. Creating a Modelling Plan - Frame SOLIDWORKS Training L1.mp4

00:21

4. Datum Dimensions - Frame SOLIDWORKS Training L1.mp4

01:01

5. Creating the Material Blank - Frame SOLIDWORKS Training L1.mp4

00:51

6. Subtracting Shape Cut-outs - Frame SOLIDWORKS Training L1.mp4

01:32

7. Cutting Holes - Frame SOLIDWORKS Training L1.mp4

02:17

8. Adding Radii - Frame SOLIDWORKS Training L1.mp4

00:50

9. Hole Wizard Thread Through - Frame SOLIDWORKS Training L1.mp4

06:32

10. Hole Wizard Thread Blind - Frame SOLIDWORKS Training L1.mp4

03:59

11. Material, Mass & Save - Frame SOLIDWORKS Training L1.mp4

01:15

12. Outro - Frame SOLIDWORKS Training L1.mp4

01:10

14. Part 9 Piston Housing Part Modelling

1. Introduction - Piston Housing SOLIDWORKS Training L1.mp4

01:15

2. Reading the Drawing - Piston Housing SOLIDWORKS Training L1.mp4

00:52

3. Creating a Modelling Plan - Piston Housing SOLIDWORKS Training L1.mp4

01:27

4. Creating the Bulk Material - Piston Housing SOLIDWORKS Training L1.mp4

00:44

5. Adding to the Geometry - Piston Housing SOLIDWORKS Training L1.mp4

02:18

6. Convert Entities and Offset Cut - Piston Housing SOLIDWORKS Training L1.mp4

02:30

7. Cutting Threaded Hole - Piston Housing SOLIDWORKS Training L1.mp4

02:06

8. Cutting Recessed Hole - Piston Housing SOLIDWORKS Training L1.mp4

00:55

9. Cutting Final Hole - Piston Housing SOLIDWORKS Training L1.mp4

01:28

10. Adding Chamfers - Piston Housing SOLIDWORKS Training L1.mp4

00:46

11. Material, Mass & Save - Piston Housing SOLIDWORKS Training L1.mp4

00:49

12. Outro - Piston Housing SOLIDWORKS Training L1.mp4

00:52

15. Part 10 Flywheel Part Modelling

1. Introduction - Flywheel SOLIDWORKS Training L1.mp4

01:50

2. Reading the Drawing - Flywheel SOLIDWORKS Training L1.mp4

00:29

3. Creating a Plan - Flywheel SOLIDWORKS Training L1.mp4

01:16

4. First Extrude - Flywheel SOLIDWORKS Training L1.mp4

00:50

5. Offset Extrude - Flywheel SOLIDWORKS Training L1.mp4

03:32

6. Large Diameter Extrude - Flywheel SOLIDWORKS Training L1.mp4

01:23

7. Planning the Pattern Feature - Flywheel SOLIDWORKS Training L1.mp4

01:11

8. Using Construction Lines - Flywheel SOLIDWORKS Training L1.mp4

01:16

9. Offset Sketch for Spokes - Flywheel SOLIDWORKS Training L1.mp4

01:42

10. Cutting an Open Sketch Profile - Flywheel SOLIDWORKS Training L1.mp4

04:01

11. Adding Radii - Flywheel SOLIDWORKS Training L1.mp4

01:27

12. Circular Feature Pattern - Flywheel SOLIDWORKS Training L1.mp4

02:46

13. Cut Hole from a Plane - Flywheel SOLIDWORKS Training L1.mp4

02:05

14. Adding and Editing Chamfers - Flywheel SOLIDWORKS Training L1.mp4

01:36

15. Material, Mass & Save - Flywheel SOLIDWORKS Training L1.mp4

00:58

16. Outro - Flywheel SOLIDWORKS Training L1.mp4

01:28

16. Revolve Extrude Tool

1. Introduction - Revolve Extrude Feature SOLIDWORKS Training L1.mp4

00:49

2. Revolve the Big End Journal - Revolve Extrude Feature SOLIDWORKS Training L1.mp4

03:17

3. Revolve the Piston - Revolve Extrude Feature SOLIDWORKS Training L1.mp4

07:11

4. Revolve the Flywheel Blank - Revolve Extrude Feature SOLIDWORKS Training L1.mp4

07:09

5. Revolve a Doughnut - Revolve Extrude Feature SOLIDWORKS Training L1.mp4

01:00

6. Revolve a Sphere - Revolve Extrude Feature SOLIDWORKS Training L1.mp4

00:45

7. Outro - Revolve Extrude Feature SOLIDWORKS Training L1.mp4

02:32

17. Building The Assembly

1. Introduction - Building the Assembly SOLIDWORKS Training L1.mp4

01:21

2. Steam Engine Assembly Overview - Building the Assembly SOLIDWORKS Training L1.mp4

01:05

3. Sectional View in Assembly - Building the Assembly SOLIDWORKS Training L1.mp4

00:54

4. Assembly Tree - Building the Assembly SOLIDWORKS Training L1.mp4

00:59

5. Editing Parts in the Assembly - Building the Assembly SOLIDWORKS Training L1.mp4

01:13

6. Introduction to Mates - Building the Assembly SOLIDWORKS Training L1.mp4

01:55

7. Setting Assembly Planes - Building the Assembly SOLIDWORKS Training L1.mp4

01:21

8. Opening the Reference Assembly - Building the Assembly SOLIDWORKS Training L1.mp4

00:26

9. Opening your First Part in the Assembly - Building the Assembly SOLIDWORKS.mp4

02:16

10. Moving and Rotating in the Assembly - Building the Assembly SOLIDWORKS.mp4

01:27

11. Applying a Planar Mate - Building the Assembly SOLIDWORKS Training L1.mp4

03:20

12. Fully Mating the First Part - Building the Assembly SOLIDWORKS Training L1.mp4

02:38

13. Real Time Mating of your First Part - Building the Assembly SOLIDWORKS.mp4

01:34

14. Adding a Second Part and Mating - Building the Assembly SOLIDWORKS Training L1.mp4

03:08

15. Identifying Mate Errors - Building the Assembly SOLIDWORKS Training L1.mp4

00:55

16. Mate the Crank Shaft Bush - Building the Assembly SOLIDWORKS Training L1.mp4

02:25

17. Mate Crank, Shaft and Flywheel - Building the Assembly SOLIDWORKS Training L1.mp4

02:34

18. Mate Big End Journal and ConRod - Building the Assembly SOLIDWORKS Training L1.mp4

02:05

19. Mate Piston and Housing - Building the Assembly SOLIDWORKS Training L1.mp4

02:39

20. Final Mates and Lock Mate - Building the Assembly SOLIDWORKS Training L1.mp4

02:44

21. Edit Mates in the Assembly - Building the Assembly SOLIDWORKS Training L1.mp4

01:20

22. Assembly Save and Rebuild - Building the Assembly SOLIDWORKS Training L1.mp4

00:51

23. Outro - Building the Assembly SOLIDWORKS Training L1.mp4

00:40

18. Editing and Creating Parts in the Assembly Mode

1. Introduction - Editing and Creating Parts in the Assembly SOLIDWORKS Training.mp4

00:56

2. Identifying Assembly Issues - Editing and Creating Parts in the Assembly.mp4

01:22

3. Fixing the Scoop Gap - Editing and Creating Parts in the Assembly SOLIDWORKS.mp4

05:04

4. Fix Crank Shaft Length - Editing and Creating Parts in the Assembly SOLIDWORK.mp4

02:17

5. Fix Flywheel Centre Hole - Editing and Creating Parts in the Assembly SOLIDWORKS.mp4

01:18

6. Reapplying Deleted Mates - Editing and Creating Parts in the Assembly.mp4

00:57

7. Creating a New Contextual Part - Editing and Creating Parts in the Assembly.mp4

08:10

8. Assembly Evaluation Tools - Editing and Creating Parts in the Assembly.mp4

01:43

9. Edited Assembly Overview - Editing and Creating Parts in the Assembly.mp4

00:24

10. Outro - Editing and Creating Parts in the Assembly SOLIDWORKS Training L1.mp4

00:28

19. Creating Technical Drawings In SOLIDWORKS

1. Introduction - Creating Technical Drawings Making Technical Drawings SOLIDWORK.mp4

01:31

2. Start a New Technical Drawing - Making Technical Drawings SOLIDWORKS Training.mp4

00:23

3. Select Sheet Format and Size - Making Technical Drawings SOLIDWORKS Training.mp4

01:35

4. Adding the First Part to the Drawing - Making Technical Drawings SOLIDWORKS.mp4

00:53

5. Rotating the Drawing View - Making Technical Drawings SOLIDWORKS Training L1.mp4

01:19

6. Drawing Display Style - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:56

7. Scale the Drawing View - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:56

8. Adding Projected Views - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:42

9. Adding Centre Lines - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:50

10. View Pallet - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:40

11. Adding a 3D View - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:49

12. Rotating a 3D View - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:52

13. Adding Dimensions - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:44

14. Sizing and Positioning Dimensions - Making Technical Drawings SOLIDWORKS.mp4

01:34

15. Centring a Dimension - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:37

16. Chamfer Dimension - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:43

17. TYP and Adding Text to a Dimension - Making Technical Drawings SOLIDWORKS L1.mp4

01:13

18. Introduction to the Title Block - Making Technical Drawings SOLIDWORKS L1.mp4

01:03

19. Edit Sheet Format - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:46

20. Annotations - Making Technical Drawings SOLIDWORKS Training L1.mp4

01:21

21. Save the Drawing - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:26

22. Opening a Model from the Drawing - Making Technical Drawings SOLIDWORKS.mp4

00:27

23. Model and Drawing Links - Making Technical Drawings SOLIDWORKS Training L1.mp4

01:35

24. Save as a PDF File - Making Technical Drawings SOLIDWORKS Training L1.mp4

01:35

25. Sectional View Tool - Making Technical Drawings SOLIDWORKS Training L1.mp4

02:38

26. Creating an Assembly Drawing - Making Technical Drawings SOLIDWORKS L1.mp4

02:05

27. Creating Multiple Drawing Sheets - Making Technical Drawings SOLIDWORKS L1.mp4

01:17

28. Bill of Materials - Making Technical Drawings SOLIDWORKS Training L1.mp4

02:05

29. Balloon Numbering - Making Technical Drawings SOLIDWORKS Training L1.mp4

02:47

30. Adding Additional Views - Making Technical Drawings SOLIDWORKS Training L1.mp4

01:31

31. Broken Out Section - Making Technical Drawings SOLIDWORKS Training L1.mp4

01:12

32. Outro - Making Technical Drawings SOLIDWORKS Training L1.mp4

00:33

Description

Learn from Certified SolidWorks Expert (CSWE), Award Winning Teacher and a Professional UK Engineer

What You'll Learn?

A Simplified SolidWorks Modelling Process To Help You Build Any Part No Matter How Complex Its Geometry
How To Build A Range Of Realistic Virtual Models Within SolidWorks
Create A Working Steam Engine Assembly With Realistic Motion
Develop A Technical Drawing Pack From Your Models and Assemblies
Edit and Create Parts In The Assembly Mode

Who is this for?

Beginner SolidWorks users; students or professionals

More details

Description
SOLIDWORKS expert teaches you how to save time and money on your path to becoming a SOLIDWORKS Professional.
Learn the skills of professional SOLIDWORKS users.

We will show you a tried and tested process to make parts in SOLIDWORKS that will empower you to quickly make your own designs easily and effortlessly.

LEARN BY MODELLING REAL-WORLD EXAMPLES, NOT USELESS WIDGETS.

Our previous SolidWorks clients include professionals from:
Rolls Royce
Airbus
GE Aviation
Renishaw
Jaguar Land-Rover
GKN Aerospace
Saint Gobain
Moog

You Will Build A Working Steam Engine!
The little Steam Engine allows you to start modelling very basic parts, to allow you to get to grips with the fundamental skills you need without overload, before building up into more complexity one model at a time. Each part adds a little more complexity than the previous one, finally resulting in the creation of the Flywheel. You will then mate the parts together, and create edits, in the assembly mode before making a new contextual part from the assembly. Finally, you will be introduced to creating technical drawings.
This is really the perfect starting point to nail the basics of SOLIDWORKS.

Why you need this course:
15 years ago I decided to apply for a Design Engineer job for a small rural company in the heart of England, UK. The job advert stated that "experience in designing with SOLIDWORKS was essential".
I had never used SOLIDWORKS....so I did what most would do - I got a free 30-day trial and went to YouTube to learn. I slowly and painfully followed a sped-up tutorial that had no commentary, built an alloy wheel, took a screenshot and sent it in with my application form stating that I had some experience using SOLIDWORKS.
It worked and I was offered the job (I also had lots of experience working as a production engineer so didn't completely wing it!).
Day 1 of being a SOLIDWORKS Design Engineer. "Hi, can you quickly model this block and put an M10 through hole in the middle" came the request from my supervisor. I couldn't do it. I was found out.
REASON #1
Following sped-up videos on YouTube may get you some results, but they do not teach you how to use the SOLIDWORKS software for YOURSELF.

Although disappointed, the company paired me with another designer for a few weeks to get me trained quickly (and cheaply). He built the block with a hole in less than 2 minutes.
I was trained to use SOLIDWORKS the same way as the other 4 designers in the team. This was okay but common issues kept coming up: editing parts was troublesome, persistent issues with part relationships and mates in assemblies and creating technical drawings often took longer than designing the parts. I assumed this was just how SOLIDWORKS was.
REASON #2
Too many SOLIDWORKS users learn poor techniques from people who can't use the software properly themselves!

12 months later, I landed a new job as a college lecturer in engineering (I also had previous experience working as a lecturer). Part of my new job was to teach 16-18-year-olds how to use SOLIDWORKS. No problem.
A colleague then introduced me to the SOLIDWORKS certification program. "I will smash this" I confidently said and sat the CSWA (Certified SOLIDWORKS Associate) exam. I failed it. Oops.
REASON #3
Poor SOLIDWORKS techniques will cause persistent problems. I can teach you an effective and efficient technique that minimises errors and simplifies the modelling process.

I realised the troubles I had with SOLIDWORKS weren't due to the software but because I had been taught some very poor techniques. How could I teach anyone if I couldn't pass the basic exam? From this moment, I decided that I would relearn SOLIDWORKS from the ground up. Now I have:
15 years of teaching experience
2500 students successfully taught
100s of professional engineers taught
8 SOLIDWORKS exams passed, including the CSWE (Certified Expert)

Along this path, I have realised that there are some key ingredients that are essential to building an understanding of how to be effective in SOLIDWORKS:
Application: Understanding how the software and its functions work enables you to select and use the most appropriate tools.
Process: Having a clear process to follow enables you to effectively break down the modelling task into a set of micro-tasks, no matter how complex or simplistic your model's geometry is.
Intent: Building in design intent to gain maximum control and flexibility with your geometry will level up your modelling abilities to make you a more efficient and effective SOLIDWORKS user.
REASON #4
My vast experience in delivering SOLIDWORKS courses to thousands of people has enabled me to develop a process that anyone can follow to create complex geometry.

This is the course I wish I had when I started to learn SOLIDWORKS.

Sign Up NOW
Who this course is for:
Beginner SolidWorks users; students or professionals

User Reviews

Rating

average 0

Total votes0

Focused display

SOLIDWORKS

Elite Engineering

Instructor's Courses

Hi.I am Steve, your Tutor from Elite Engineering.I am a Professional Design Engineer, Award Winning Teacher and a Certified SolidWorks Expert - CSWE.I have over 25 years Engineering experience, including 15 years working in Universities and Colleges in the UK, and 12 years experience with SolidWorks.I have taught thousands (+2500) students a range of engineering subjects including professional engineers from Rolls Royce, Airbus, GKN Aerospace, Dyson and Jaguar Land rover, to name check a few, to thousands of 16-22 year old students, to a 75 year old with no CAD or engineering experience and classes of 10 year olds!I have earnt the official SolidWorks CSWE - Certified SolidWorks Expert - certification, one of only 2500 people to achieve this, worldwide, from an estimated 15 million users.You are in safe hands!

Udemy

View courses Udemy

Students take courses primarily to improve job-related skills.Some courses generate credit toward technical certification. Udemy has made a special effort to attract corporate trainers seeking to create coursework for employees of their company.