Building up a Multihomed Core ISP network using Juniper

Focused View

Maher Haddad

1:50:41

4 View

1. Explanation about the LAB scenario of this course.mp4

07:00

2. Setting up IP addressing on the routers.mp4

09:37

3. Configure BGP between the Upstream and ISPs routers.mp4

15:27

4. Configure BGP between ISP1 and R1.mp4

11:07

5. Configure BGP between ISP2 and R4.mp4

07:36

6. Configure OSPF on the ISP core network.mp4

12:26

7. Inserting a default route into OSPF.mp4

12:18

8. Announce prefixes to both ISPs via BGP.mp4

16:36

9. Allow Internet traffic to reach our prefixes using both ISPs with AS PREPEND.mp4

18:34

Description

A fully practical course showing how to configure a multihomed ISP core network using Juniper appliances

What You'll Learn?

Build a fully redundant ISP core with Juniper
Configure BGP routing protocol
Configure OSPF routing protocol
Configure AS PATH PREPEND attribute

Who is this for?

Engineers working in ISPs and using Juniper products

What You Need to Know?

Good knowledge with Juniper CLI, BGP and OSPF

More details

Description
Setting up and ISP core network is always a challenge for every ISP. However, if it is designed correctly for one time, then the ISP network would work smoothly forever.
One of the best product to use when running an ISPÂ network is Juniper. As being a very solid product, Juniper is an appliance that it is always highly recommended for ISPÂ core networks and data centers.
In this course, I will use Juniper MX OS to show you how it is possible to build up from scratch a fully redundant and resillient ISP core network.
I will be using advance routing protocols such as Border Gateway Protoco (BGP) and Open Shortest Path First (OSPF) in order to build up my ISP core network. Additionally, I will have to configure the routers of the upstreams (in real life we do not do that) just because IÂ will be doing a complete LAB and also you will learn how ISPs configure their upstream router.
By end of the course, you will have a fully redundant ISPÂ network and you will have a full understanding of how you can configure your ISP core network yourself in your ISP.
I will be showing step by step how everything is being configure, and IÂ will stop at every point and explain what IÂ am doing.
If you wish to have a full understanding of how to set up an ISP core network using Juniper appliances, then this course is for you.
Who this course is for:
Engineers working in ISPs and using Juniper products

User Reviews

Rating

average 0

Total votes0

Focused display

Hello everyone. My name is Maher Haddad with a very long experience in the IT sector. I hold a Bachelor in Computer Communications and a Master in Computer science. I work as a trainer and I hold the following certificates: CCNA, CCNA Security, CCNA Voice, CCDA, CCNP R&S, CCDP, Microsoft MCP, Microsoft MCSA , MikroTik MTCNA, MTCRE, MTCWE, MTCUME, MTCTCE, MTCINE, MTCSE, MTCSWE, MTCWEW, MTCIPv6 Huawei HCNA, CWTS, Ubiquiti UEWA, LigoWave NFT engineer, LigoWave DLB Engineer, Fortinet NSE1, Fortinet NSE2, GVF Level1, GVF level2, GVF Level3 and much more.....My experience in IT goes to year 2003 and I have been working all my life for international Internet Service Providers (ISP's) in different countries in the world. I hope you will enjoy watching my courses.

Udemy

View courses Udemy

Students take courses primarily to improve job-related skills.Some courses generate credit toward technical certification. Udemy has made a special effort to attract corporate trainers seeking to create coursework for employees of their company.